Nautical Doodle Waves Wallpaper: A Kid's Room How-To

Quick answer

Hang nautical kids wallpaper by prepping a clean, smooth wall, ordering all panels in one batch, and installing peel-and-stick panels from the top down while smoothing each section as you go.

Step-by-step installation

1. Clean and smooth the wall: Wash the wall with mild detergent, rinse, and let it dry fully. Fill any holes and sand smooth. Checkpoint: the wall must be completely dry and free of dust before applying any panel. Skipping this step is the most common cause of peeling edges.
2. Order all panels in one batch: Measure your wall area and order every panel you need at once. Wallpaper colors may vary slightly between batches, so a single order keeps the doodle waves consistent. Ordering extra for mistakes is cheaper than a second batch with a slight color shift.
3. Mark a vertical guide line: Use a level to draw a faint vertical line where your first panel will go. This keeps the waves straight. Checkpoint: step back and confirm the line is truly vertical before peeling any backing. A crooked first panel makes every following panel harder to align.
4. Peel and apply the first panel from the top: Peel back a few inches of backing at the top, press the panel to the wall along your guide line, and smooth it downward while peeling the rest of the backing. Checkpoint: keep the panel edges aligned with the guide line as you go. Work in small sections to avoid trapping air bubbles.
5. Smooth out bubbles as you go: Use a wallpaper smoother or a clean, dry cloth to push air bubbles toward the edges immediately after applying each section. Checkpoint: if a bubble persists, gently lift the edge and re-smooth rather than pressing hard. Small bubbles often disappear after a few days, but large ones need attention right away.
6. Align the next panel and match the pattern: Butt the next panel tightly against the first, matching the wave pattern at the seam. Checkpoint: check the pattern match at eye level before fully adhering the panel. Slight pattern mismatches are more visible at seams than in the middle of a wall.
7. Trim excess at edges: Use a sharp utility knife and a straight edge to trim excess wallpaper at the ceiling, baseboard, and corners. Checkpoint: change the blade often to avoid tearing the textile material. A dull blade causes ragged edges that are hard to fix later.

Product facts

• Doodle waves nautical theme wallpaper: Self adhesive removable textile wallpaper, water-resistant and gently cleanable, PVC free, printed with GreenGuard Gold. The removable adhesive lets you reposition panels during installation, and the water-resistant surface is practical for a kid's room.