How to Hang Vintage Safari Animal Wallpaper in a Kid's Room
By Livettes Wallpaper: Modern Wallpaper For Any Space Free Shipping | Published: 2026-11-01
Category: How-to Guides
A step-by-step guide to hanging vintage safari animal wallpaper in a kid's room, from wall prep to pattern alignment and cleanup, with checkpoints to avoid common mistakes.
Quick answer
Hang vintage safari animal wallpaper by prepping a clean, smooth wall, ordering all panels at once, and working panel by panel with a plumb line and squeegee. Check pattern alignment before you press each panel down.
Why order all panels at once
Vintage safari animal wallpaper often has a repeat pattern, and colors can vary slightly between batches. If you order panels separately, the second batch may not match the first exactly. Ordering all panels for the room in one go is the simplest way to keep the pattern and color consistent across the wall.
Plan around kid-friendly furniture and height
Safari nursery wallpaper ideas often look best when the pattern sits at eye level for a crib or bed. Before you start, decide the focal wall and check that the wallpaper height works with any wainscoting, shelving, or furniture. This avoids awkward cuts around outlets and keeps the animal motifs visible.
Step-by-step installation
- Prep the wall: Clean the wall with a damp cloth and let it dry completely. Fill any holes and sand smooth. Wipe away dust so the adhesive can grip. A dusty or damp wall is the most common reason wallpaper peels at the edges.
- Measure and order all panels: Measure the full width and height of the wall, then add 10% extra for pattern matching and trimming. Order all panels at once to avoid batch color differences. Check the pattern repeat before ordering; extra length is easier than a mismatched seam.
- Mark a plumb line: Use a level to draw a vertical line where the first panel will go. This keeps every panel straight, especially in older rooms where walls are not perfectly square. Start from the center of the focal wall if you want the pattern balanced on both sides.
- Peel and position the first panel: Remove the backing from the top few inches of the self-adhesive wallpaper and press it along the plumb line. Smooth downward with a squeegee as you peel the rest. Do not press the whole panel down at once; work in small sections to avoid bubbles.
- Align the pattern on the next panel: Before removing the backing, hold the next panel next to the first and match the safari animal pattern at eye level. Trim any excess at the top and bottom with a sharp blade. A slight overlap is easier to fix than a gap; trim after both edges are aligned.
- Smooth and clean up: Run a squeegee from the center outward to push out air bubbles. Wipe any adhesive residue with a damp cloth. Keep the room ventilated while the wallpaper settles. Check edges after an hour; press down any lifted corners before they curl.
Product facts
- Vintage Safari Animal Wallpaper: Self adhesive removable textile wallpaper with water-resistant, gently cleanable PVC-free material. This makes it a practical choice for a kid's room where spills and sticky fingers are common, and it can be removed later without major wall damage.
Vintage Safari Animal Wallpaper
