How to Hang a Pastel Matisse Bricks Wall Mural
By Livettes Wallpaper: Modern Wallpaper For Any Space Free Shipping | Published: 2026-10-26
Category: How-to Guides
Learn the step-by-step process to install your Pastel Matisse Bricks wall mural without bubbles or misalignment, including surface prep and panel alignment tips.
Quick answer
To hang your Pastel Matisse Bricks wall mural, clean and prime the wall, then install the five self-adhesive panels in order, smoothing from center to edges to avoid bubbles.
Why surface preparation matters
A smooth, clean, and dry wall is essential for the self-adhesive material to stick properly. Even small bumps or dust can cause the mural to lift or bubble later.
If your wall has a textured finish, consider applying a thin layer of joint compound and sanding it smooth before installation. This step is often overlooked but makes the biggest difference in the final look.
Understanding the panel layout
The Pastel Matisse Bricks wall mural comes in five panels, each 19 inches wide by 108 inches tall. The pattern repeats every five panels, so the sequence is critical for a seamless look.
Lay the panels on the floor in order before starting. Mark the back of each panel with a pencil to avoid confusion during installation.
Step-by-step installation guide
- Prepare the wall: Clean the wall with a damp cloth to remove dust and grease. Let it dry completely. Patch any holes or cracks and sand them smooth. A common mistake is skipping the cleaning step, which can cause the adhesive to fail later.
- Mark the starting point: Use a level to draw a vertical line where the first panel will go. This ensures the mural hangs straight. Start from a corner or the center of the wall. Double-check the line with a level; even a slight tilt will be visible across five panels.
- Peel and position the first panel: Peel back a few inches of the backing paper and align the top edge with your starting line. Press the panel onto the wall, then slowly peel the rest of the backing while smoothing the panel downward with a squeegee or soft cloth. Work from the center outward to push air bubbles to the edges. If a bubble remains, lift the panel slightly and re-smooth.
- Install the remaining panels: Butt the next panel edge-to-edge with the previous one, matching the pattern. Use the same peel-and-smooth technique. Do not overlap the panels. A gap or overlap will break the pattern repeat. If the panels shift, gently reposition them within the first 30 seconds.
- Trim excess and finish: Use a sharp utility knife and a straightedge to trim the mural at the ceiling, floor, and corners. Wipe the surface gently with a dry cloth to ensure full adhesion. Let the mural set for 24 hours before cleaning or touching it. The adhesive strengthens over time.
Product details
- Pastel Matisse Bricks Wall Mural: Self-adhesive textile wallpaper, water-resistant and gently cleanable, printed with GreenGuard Gold certified inks. You can wipe the mural gently if dust or fingerprints appear during installation, and the inks are low-VOC, making it suitable for bedrooms or nurseries.
Pastel Matisse Bricks Wall Mural
